Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Orlando?
Most chimney repairs in Orlando run between $250 and $1,200, with the average homeowner spending around $550. Minor fixes like mortar patchwork or flashing resealing sit at the lower end, while a full chimney rebuild or stainless steel liner replacement can reach $4,800 or more. The final number depends on what’s actually wrong, how accessible the chimney is, and whether your home sits in an older Orlando neighborhood like College Park, Delaney Park, or Winter Park with original 1950s brickwork.
Before any work begins at your home, we put a written price in your hands. No surprises at the door, no pressure to sign on the spot. That’s how we’ve done it since joining the Cedarwell family of companies, and it’s the only way we know to do right by families with kids and pets in the house.
Chimney Repair Cost Breakdown (2026)
Here’s what Orlando homeowners can expect to pay for common chimney repairs in 2026. These ranges reflect what we see across the metro, from Baldwin Park to Conway to Dr. Phillips:
| Repair Type | Typical Cost Range | What’s Involved |
|---|---|---|
| Mortar joint repair (tuckpointing) | $350 – $850 | Removing deteriorated mortar and repacking joints on the exterior chimney stack |
| Chimney crown repair or rebuild | $450 – $1,200 | Sealing cracks or pouring a new concrete crown to stop water entry at the top |
| Flashing repair or replacement | $300 – $900 | Resealing or replacing the metal flashing where the chimney meets the roofline |
| Firebox repair (brick or refractory panel) | $600 – $1,800 | Repairing cracked firebrick or replacing damaged refractory panels inside the firebox |
| Damper replacement | $250 – $600 | Removing a rusted or stuck damper and installing a new top-sealing or throat damper |
| Stainless steel liner replacement | $2,500 – $4,800 | Installing a new UL-listed liner (we use DuraFlex and Olympia Chimney systems) |
| Partial chimney rebuild (above roofline) | $1,500 – $3,500 | Rebuilding the top courses of brick that have spalled or cracked from Orlando’s humidity and rain |
| Full chimney rebuild | $4,000 – $9,000+ | Tearing down and rebuilding the entire chimney structure |
| Water leak diagnosis and repair | $200 – $500 | Identifying the source of water intrusion and sealing the entry point |
These numbers are honest ranges for the Orlando market. A 1960s ranch in Azalea Park with a single flue will cost less to repair than a two-story colonial in Thornton Park with a multi-flue chimney and a steep roof pitch. What drives the number up or down comes down to a few specific things, which we’ll walk through below.
If you want to know what your chimney specifically needs, the fastest way is to call (850) 940-3442. A live person answers, 24 hours a day, and we’ll schedule a time for one of our background-checked technicians to come out and give you a written price before any work starts.
What Affects Chimney Repair Pricing in Orlando
Orlando is not like other markets, and the reasons are baked into the climate and the housing stock. Here’s what actually moves the price:
- Water damage from Florida rain and humidity. Orlando gets about 51 inches of rain a year, and the summer humidity regularly sits above 70%. Chimneys here take a beating from moisture. Cracked crowns, failed flashing, and spalling brick are the three most common repairs we see, and they’re all water-related. The longer water sits in the masonry, the more expensive the fix.
- Age of the home. Orlando’s historic districts, like Lake Eola Heights and the brick streets of Colonialtown, have chimneys that were built in the 1920s and 1930s. Older mortar, original clay liners, and decades of Central Florida thunderstorms mean more layers of repair. Newer construction in areas like Lake Nona or Winter Garden tends to need less structural work but sometimes has flashing issues from faster builds.
- Chimney height and roof access. Multi-story homes mean scaffolding or taller ladders, which adds labor time. A single-story ranch in Conway is more straightforward than a three-story Mediterranean in Windermere. The roof pitch matters too, especially if the chimney sits on a steep tile roof.
- Liner condition. If the clay tile liner inside the chimney is cracked or missing sections, you’re looking at a stainless steel liner replacement. We use DuraFlex and Olympia Chimney liner systems because they hold up to Florida’s heat and humidity better than cheaper alternatives. A liner replacement is one of the more expensive repairs, but it’s also one of the most important for safety.
- Repair vs. rebuild threshold. Sometimes the brick itself is too far gone. If more than 30% of the bricks on the stack are spalled or the mortar has turned to sand, patching won’t hold. A partial rebuild above the roofline is the honest fix, and it costs more than tuckpointing because it’s real masonry work done by hand.
- Access to the firebox and flue. Older Orlando homes sometimes have narrow flues or unusual firebox dimensions. If we need to bring in specialized materials or take extra time to protect surrounding flooring and furniture, that factors into the written price we give you before starting.
How to Save on Chimney Repair
Chimney repair is not where you want to cut corners, but there are ways to keep costs down without sacrificing the safety of the work:
- Fix small problems before they become big ones. A $400 crown repair today prevents a $3,500 rebuild in three years. Orlando’s rain doesn’t wait, and neither does water damage. If you see cracked mortar or white staining on the brick, call us. Early fixes are almost always cheaper.
- Schedule an annual chimney inspection. A Level 1 inspection catches issues before they become repairs. We charge a fair price for inspections, and if we find nothing wrong, we’ll tell you exactly that. No invented problems, no upsells.
- Bundle repairs. If you need tuckpointing and a crown repair, doing them in the same visit costs less than scheduling two separate trips. We’ll give you one written price for all of it, and there’s no pressure to add anything you don’t need.
- Ask about the materials. We use professional-grade brands like HeatShield for resurfacing and Gelco for water repellent treatments, but we’ll also tell you when a less expensive option will genuinely work just as well for your situation. Honesty about what the chimney actually needs is part of the job.
- Get a written estimate first. Free estimates mean you know the number before you commit. Call (850) 940-3442 and we’ll send a technician to your home, put the price in writing, and give you time to think about it. No on-the-spot tactics, ever.
Common Chimney Problems in Orlando Homes
Every city has its own chimney problems, and Orlando’s are pretty consistent. Here’s what we see most often when we knock on doors from Audubon Park to SoDo:
Water Leaks and Moisture Damage
Orlando’s summer thunderstorms are intense. Water gets in through cracked crowns, failed flashing, and porous brick. Once moisture is inside the masonry, the freeze-thaw cycle isn’t even the main concern here, it’s the constant wet-dry cycle that breaks down mortar and causes brick faces to pop off. White staining on the chimney exterior is a telltale sign that water has been moving through the masonry for a while. Sealing the entry point and repairing the damaged area usually runs $200 to $1,200 depending on how far the water has traveled.
Cracked or Missing Flue Tiles
The clay liner inside your chimney is what keeps heat and combustion gases contained. When those tiles crack, which happens with age and thermal stress, the chimney isn’t safe to use until it’s fixed. HeatShield is one system we use to resurface a damaged flue, and a full stainless liner replacement with DuraFlex is the option when the damage is extensive. Liner repairs start around $2,500 and go up from there, but they’re non-negotiable if you want to use the fireplace safely.
Spalling Brick
Spalling happens when water gets inside the brick and causes the face to pop off. You’ll see brick fragments on the ground near the chimney or on the roof. In Orlando’s older neighborhoods, we see this on nearly every original chimney. The fix is either replacing individual bricks or rebuilding sections of the stack, and it’s one of those repairs where the earlier you address it, the cheaper it is.
Rusted or Stuck Dampers
Humidity does a number on cast iron dampers. They rust, they seize, and sometimes they fall out of position entirely. A replacement damper runs $250 to $600, and it makes a real difference in both fireplace performance and how much conditioned air escapes up the chimney when the fireplace isn’t in use.
Chimney Crown Cracks
The crown is the concrete cap at the very top of the chimney. Its whole job is to shed water away from the flue and the brick. When it cracks, which happens over time in Florida’s heat, water gets in. Crown repair or replacement is one of the most cost-effective fixes we do, typically $450 to $1,200, and it prevents a cascade of more expensive damage below.
Is It Cheaper to Repair or Replace a Chimney?
For most Orlando homes, repairing is significantly cheaper than a full rebuild. A full chimney rebuild starts around $4,000 and can exceed $9,000 depending on the height, brick type, and access. Most repairs we quote fall between $250 and $1,800. That’s a big gap, so the question becomes: at what point does repair stop making sense?
The general threshold is when more than 30% of the chimney structure needs replacement, or when the foundation of the chimney itself has shifted. In those cases, patching things back together is throwing money away. We’ll tell you straight if a rebuild is the right call, and we’ll also tell you if a less extensive repair will get the job done safely. That’s what the written price and the honest assessment are for.
Danny Cortes, who leads Kindling Chimney Orlando, puts it simply: we’d rather lose a job than sell a repair that won’t hold. The 365-Day Done Right Promise exists for exactly this reason. If we do the work and it’s not right, we make it right. No fine print, no runaround.
Do You Need a Chimney Inspection Before a Repair?
Yes, and any reputable chimney company in Orlando will inspect before quoting a repair. When we arrive at your home, the technician goes through a Level 1 or Level 2 inspection depending on the situation. A Level 1 inspection covers the accessible parts of the chimney and is standard when nothing has changed since the last service. A Level 2 inspection is more thorough and is what we recommend when you’ve had a chimney fire, a lightning strike, a major storm, or when you’re buying or selling a home.
The inspection tells us exactly what’s wrong, which means the written price we give you is based on facts, not guesses. The inspection is included as part of the estimate process, so you’re not paying extra just to find out what the repair will cost. Call (850) 940-3442 and we’ll walk you through what to expect before the technician even arrives.
How Long Does a Chimney Repair Take in Orlando?
Most standard repairs, like tuckpointing, crown repair, and flashing work, are done in a single day. That includes the time it takes to set up drop cloths, do the work, and clean up thoroughly before we leave. Liner replacements typically take a full day as well, though some two-story homes with complex flue configurations can take a bit longer. Partial rebuilds run two to three days depending on the height and how much brick needs to be laid.
We schedule repairs on a day that works for your family, and we show up when we say we will. Our technicians are background-checked and in uniform, and the Cedarwell Care Promise means shoe covers and drop cloths go down before any work starts. Nothing gets moved in your home without asking, and a photo of the clean-up is taken before the crew leaves. If you have kids or pets, we use pet-safe products where there’s a choice, and we’ll work with you on timing if you need us there when the house is quiet.
Can You Repair a Chimney Yourself?
We strongly recommend against DIY chimney repair. This is one area where the danger isn’t just in doing the work wrong, it’s in doing work that looks right but fails in ways you can’t see. A chimney that isn’t properly sealed or lined can allow carbon monoxide into the home or let heat reach combustible materials around the chimney chase. That’s not a risk worth taking to save a few hundred dollars.
Chimney work also involves heights, mortar mixing that has to match existing brick, and materials that need to be rated for high-temperature use. What looks like a simple patch job often reveals deeper problems once you’re up there. Our technicians are trained to spot those problems and fix them properly, with materials from brands like HeatShield, Gelco, and Copperfield that are designed for exactly this purpose. The written price we give you includes all of that expertise, and the 365-Day Done Right Promise means the work is guaranteed.
Why Choose Kindling Chimney Orlando for Your Repair
We’re not the only chimney company in Orlando, and we don’t try to be. What we do is simple: we show up on time, we protect your home like it’s our own, we give you a written price before any work begins, and we stand behind every repair with the 365-Day Done Right Promise. Our technicians follow the C.A.R.E. values on every visit. Shoe covers and drop cloths go down on arrival. Nothing is moved without asking. A photo of the clean-up is taken before we leave. You’ll know exactly what the crew will do and what the bill will be, and you’ll never have to wonder if the house is going to be left clean.
We’re independently owned and operated as part of the Cedarwell family of companies, established in 2003. That means we have the support and standards of a larger organization, but the accountability of a local team that works in Orlando neighborhoods every day. Danny Cortes and the team know Orlando chimneys, from the historic bungalows in College Park to the newer construction in Lake Nona and everything in between.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Orlando?
Chimney repair in Orlando typically costs between $250 and $1,200, with most homeowners paying around $550. Minor repairs like mortar patchwork or flashing resealing sit at the lower end, while a full chimney rebuild can exceed $9,000. Call (850) 940-3442 for a free written estimate on your specific chimney.
Is it cheaper to repair or replace a chimney?
Repairing is almost always cheaper. Most repairs run $250 to $1,800, while a full chimney rebuild starts at $4,000 and can reach $9,000 or more. The threshold is usually when more than 30% of the structure is compromised, at which point a rebuild is the honest recommendation. We’ll tell you which makes sense for your chimney and give you a written price either way.
How much does it cost to fix a chimney leak in Orlando?
Fixing a chimney leak in Orlando typically costs between $200 and $1,200, depending on the source. Flashing repair runs $300 to $900, crown repair runs $450 to $1,200, and basic leak sealing starts around $200. With Orlando’s 51 inches of annual rain, we recommend addressing leaks quickly. Call (850) 940-3442 for an exact diagnosis and quote.
Can you come out the same day?
Yes. A live person answers our phone 24 hours a day, 7 days a week, and we do our best to accommodate same-day and next-day appointments for urgent chimney issues. Water actively leaking into your home is a priority for us. Call (850) 940-3442 and we’ll get a technician scheduled as quickly as possible.
Do you charge for chimney repair estimates?
No. Estimates are free, and we put the price in writing before any work starts. There’s no obligation and no on-the-spot pressure. If you decide the repair isn’t in the budget right now, we’ll tell you honestly whether it can wait or if it’s a safety issue that needs attention sooner.
How long does a chimney repair take?
Most chimney repairs in Orlando are completed in one day, including tuckpointing, crown repair, flashing work, and damper replacement. Liner replacements typically take a full day, and partial rebuilds run two to three days. We’ll give you a clear timeline along with the written price before we start.
Get Your Free Chimney Repair Estimate in Orlando
If your chimney needs attention, you don’t have to guess what it’ll cost or what the crew will do when they arrive. Call (850) 940-3442 and a live person will answer, 24 hours a day, 7 days a week. We’ll schedule a time for a background-checked technician to inspect your chimney, explain exactly what’s wrong, and put a written price in your hands before any work begins. No surprises, no pressure, no mess left behind. That’s the Cedarwell Care Promise, and it’s how every job at Kindling Chimney Orlando works.
Pricing reflects the Orlando market as of 2026. Kindling Chimney Orlando offers free estimates – call (850) 940-3442.
Written by Danny Cortes, Owner at Kindling Chimney Orlando, serving Orlando families since joining the Cedarwell family of companies.
What Our Customers Say
"We have a toddler and a cat and the tech was great about keeping doors closed and not leaving tools out. Cleaned the fireplace spotless and left a photo of the finished flue."
- Perry Osei"Booked the annual sweep. No mess at all, he vacuumed the hearth and even wiped down the mantel. Quiet worker, respectful of the house. Fire draws beautifully now."
- Hank Delgado"Clean, calm, and thorough. He laid cloths from the front door to the fireplace so nothing got tracked in. Showed me before and after and explained the small repair he'd recommend, no pressure."
- Devin Marsh