Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with





See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Orlando?
Chimney liner and rebuild work in Orlando typically runs between $2,800 and $8,500, with most full relining jobs landing around $3,500 to $5,500 and partial rebuilds (crown replacement, top-course brickwork, or shoulder repair) starting near $1,200. What you’ll actually pay depends on liner type, chimney height, access difficulty, and whether the flue tiles or masonry need structural work. Here’s the honest math so you can plan without surprises.
Key Takeaways
- Stainless steel liner installation in Orlando averages $2,800 – $5,500 for a single-flue chimney.
- Full chimney rebuilds (from the roofline up) range $6,000 – $15,000+, depending on height and brick match.
- Crown repair or replacement alone is usually $800 – $1,800.
- Most Orlando homes have chimneys between 12 and 25 feet above the roof; taller runs mean more liner material and scaffolding time.
- You’ll get a written price before any work starts when you call (850) 940-3442.
- Orlando’s summer storms are the #1 reason we see crown and shoulder damage accelerate: heavy rain pools on cracked crowns, then the wet-dry cycle in clay soil shifts chimney stacks.
- Every liner or rebuild job from Kindling Chimney Orlando carries the 365-Day Done Right Promise. If it’s not right, we make it right.
- Our technicians are background-checked, uniformed, and follow the Cedarwell Care Promise: shoe covers, drop cloths, a written price up front, and a photo of the clean-up before we leave.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s what we see in the Orlando market as of 2026. These are real ranges from service calls across Orange County, from College Park to Winter Park, Dr. Phillips to Conway. Prices reflect the cost of professional-grade materials (we use DuraFlex, HeatShield, and Olympia Chimney liner systems, plus Gelco, Famco, and Copperfield components) and the labor to install them correctly.
| Service | Typical Orlando Price Range (2026) | What’s Included |
|---|---|---|
| Chimney inspection (Level 2, with camera) | $250 – $450 | Full flue video scan, moisture check, exterior assessment. Waived if you proceed with liner work. |
| Stainless steel liner installation (single flue) | $2,800 – $5,500 | DuraFlex or Olympia liner, insulation wrap, top plate, rain cap, connector to appliance or fireplace. |
| HeatShield cerfractory liner (for damaged clay tile flues) | $3,200 – $6,000 | Full flue resurfacing, no demolition needed, 20+ year expected life. |
| Crown repair / replacement | $800 – $1,800 | Custom-poured crown with proper overhang and drip edge, weatherproofing. |
| Brick repointing / tuckpointing (upper chimney) | $1,200 – $3,500 | Rake and repoint mortar joints, color-matched to existing brick. |
| Partial rebuild (top 10 – 20 courses) | $2,500 – $6,000 | Demolish and rebuild above the roofline, new crown, new flashing. |
| Full chimney rebuild (from roof up) | $6,000 – $15,000+ | Complete demolition and reconstruction, new liner, crown, flashing, and waterproofing. |
| Chase cover / chase top replacement (prefab chimneys) | $700 – $1,500 | Stainless steel chase cover, custom-fabricated, with proper cross-break design. |
If you’re noticing water stains on the ceiling near the chimney, white staining (efflorescence) on the brick, or spalling brick faces in the firebox, call us at (850) 940-3442. We’ll give you a written price before anything gets touched, and the inspection fee comes off the liner bill if you move forward.
What Affects Chimney Liner & Rebuild Pricing in Orlando
No two chimneys in Orlando cost the same to line or rebuild. Here’s what actually moves the number on your estimate.
- Chimney height and roof pitch. A one-story ranch in Conway might have 8 feet of chimney above the roofline. A two-story colonial in Baldwin Park could have 20 feet. More height means more liner material, more ladder work, and more scaffolding setup. Steep pitches (common in Lake Nona and parts of Dr. Phillips) add safety equipment and slower work.
- Liner type and flue condition. If your clay tile flue is in decent shape, a stainless liner (DuraFlex or Olympia) slides in with minimal prep and costs less. If the tiles are cracked, spalling, or missing, you’re looking at either a HeatShield resurfacing job or a full breakout and re-line. Breakout work runs $1,000 – $2,500 more because of the demolition and disposal labor.
- Access around the chimney. Some Orlando homes have chimneys boxed in by additions, screened porches, or dense oak canopy. Limited ladder access or the need for a lift adds $200 – $700 to most jobs.
- Moisture damage already present. Orlando’s rainy season (June through September) is relentless on chimney masonry. By the time we’re called, many chimneys have water-saturated crowns, corroded flashing, or spalling brick. Repairing those underlying issues before or during a liner job is the difference between a $3,500 reline and a $6,500 rebuild.
- Masonry repair scope. A crack in the crown is one crew visit. A leaning chimney stack with 30 courses of loose brick is a structural job requiring shoring, demolition, and rebuild. The gap between “seal and repair” and “rebuild from the roof up” is usually $4,000 to $9,000.
- Flashings and chase covers. Prefab chimneys (common in newer Orlando builds, especially in Horizon West and Lake Nona) typically need a custom chase cover rather than a full rebuild. Stainless steel chase covers run $700 – $1,500 installed, while a brick chimney needs new step and counter flashing. Flashing replacement alone is $400 – $900.
We always start with a camera inspection so you can see what’s actually inside the flue before you decide anything. No pressure tactics. No vague hand-waving. Just footage, measurements, and a written price.
Orlando-Specific Factors That Change the Job
Orlando has a few local quirks that affect chimney costs in ways you won’t see in, say, a dry Western city.
- The wet-dry cycle in Central Florida clay soil. Foundations and chimney stacks settle differently here than in sandy or rocky ground. As the clay expands and contracts through the year, chimney stacks can lean or crack at the shoulder (where the chimney meets the roofline). We regularly see shoulder separation in older Winter Park and College Park homes where the stack has subtle but progressive lean. Fixing it early runs $2,500 – $6,000. Waiting until bricks start dropping onto the roof deck becomes a much larger structural project.
- Summer storm flush-out. Even a small crown crack in a Central Florida summer lets water pour through the flue, eroding the clay tiles and filling the smoke shelf with debris. A camera inspection after a stormy season often reveals $3,000+ in liner damage from what started as an $800 crown repair. That’s why we recommend checking crown condition every year, before June.
- Pre-1980 masonry versus newer prefab. Older Orlando neighborhoods (Delaney Park, Thornton Park, Colonialtown) are mostly masonry chimneys. Newer communities (Baldwin Park, Avalon Park, parts of Windermere) lean heavily on prefab systems where liner failure usually means a chase cover replacement or HeatShield reline rather than a full brick rebuild.
- Hurricane and wind exposure. Chimneys here take real lateral wind load during the late-season storms. Soft mortared joints and crusted brick faces deteriorate faster with that repeated stress. Homes closer to the coast or in open subdivisions without tree cover (parts of Apopka and the 429 corridor) tend to need repointing and shoulder repair sooner than heavily canopied neighborhoods.
Our technicians walk every one of these factors with you, in plain words, with the camera footage as the evidence. You’ll never wonder if we’re inventing work because we’ll show you the crack, the spall, the liner gap, right there on the screen.
How to Save on Chimney Liner & Rebuild in Orlando
We’re going to be honest: chimney repair is not a place to chase the lowest bid. The wrong liner material installed without insulation, a cheap crown that sheds water onto the brick, a rebuild done with mismatched mortar that locks in moisture instead of wicking it: these shortcuts cost double when the repair fails. That said, there are ways to keep the number down without cutting corners.
- Inspect early, before water damage compounds. A Level 2 camera inspection is $250 – $450. If it catches a minor crown crack before the flue tile is ruined, you’re paying $800 instead of $3,500. We’ve seen this dozens of times in Orlando: the early call is always the cheap call.
- Choose the liner that matches the actual problem, not the biggest one. A HeatShield resurfacing system sometimes saves $1,500 or more over a full stainless reline when the clay tiles are sound. We’ll show you both options with prices and let you choose.
- Bundle repointing with your liner or crown work. If we’re already on the roof with scaffolding set, adding repointing of the visible upper courses costs less than a separate visit. The scaffold time is already paid for.
- Ask about inspection-fee waiver. If you schedule a liner or rebuild job with Kindling Chimney Orlando after the inspection, the inspection fee is waived. That’s $250 – $450 back in the project.
- Don’t wait for “after season.” Spring in Orlando is the shoulder period: dry, mild, and before the summer lightning season makes roof work riskier. Scheduling in March through May often gets you faster booking and avoids weather-driven rescheduling. We don’t charge surge pricing, so the savings are in time and avoided further damage.
- Use a company that gives a written price before work starts. It costs you nothing, and it prevents the classic “well, once we opened it up…” surprise. Every job we do comes with a written price first. If we find something unexpected during the work, we stop, call you, show you the video or photo, and give you a revised written price before continuing. You approve every dollar.
For a free estimate and a straight answer about your chimney, call us at (850) 940-3442. We’ll send a background-checked, uniformed technician who will show you the problem and put the price in writing.
FAQs – Chimney Liner & Rebuild Cost
How much does a stainless steel chimney liner cost in Orlando?
A stainless steel liner for a single-flue chimney in Orlando runs $2,800 – $5,500 installed in 2026, including insulation, top plate, and rain cap. Multi-flue liners or chimneys over 20 feet tall can push toward $6,000. Call (850) 940-3442 and we’ll give you a written price after a camera inspection, with the inspection fee waived if you proceed.
Is it cheaper to repair or rebuild a chimney?
Repair is almost always cheaper if the damage is limited to the crown ($800 – $1,800) or upper masonry courses ($2,500 – $6,000 for a partial rebuild). A full rebuild from the roofline up costs $6,000 – $15,000+. The deciding factor is whether the stack itself is stable. In Orlando, leaning stacks or shoulder separation at the roofline are the typical triggers for rebuilds. We’ll show you video of the structural issue before recommending the bigger job.
How much does chimney crown replacement cost in Orlando?
Crown replacement in Orlando is typically $800 – $1,800, depending on chimney size and whether the old crown needs full demolition or can be overlaid. We custom-pour crowns with proper overhang and drip edge to keep rain off the brick face, which is the single best prevention against bigger rebuild bills down the line.
Can you come today for chimney work?
Yes, in most cases. A live person answers our phones 24/7, even during a storm that just exposed a chimney leak. We don’t run voicemail trees. Call (850) 940-3442 and tell us what’s happening: we’ll schedule an inspection as fast as the same day and give you a written price before any work starts.
How long does a chimney liner or rebuild take?
A standard stainless liner installation in Orlando takes 4 to 8 hours, usually a single day. A partial rebuild takes 2 to 3 days. A full chimney rebuild runs 5 to 10 days, depending on weather and masonry scope. We’ll keep the work area protected with drop cloths and shoe covers throughout, and you’ll get a photo of the clean-up before our crew leaves.
Does homeowner’s insurance cover chimney liner or rebuild costs in Orlando?
It depends on the cause. Sudden damage from a storm, fire, or lightning strike is often covered. Gradual deterioration (cracked crowns, spalling brick, worn liners) is usually considered maintenance and not covered. We’ve worked with many Orlando homeowners on documentation: our camera reports and photos are commonly used in insurance claims. We can walk you through what your policy likely covers during the inspection.
Why Orlando Homeowners Choose Kindling Chimney Orlando
Chimney work is one of those trades where you’re asked to trust a crew you’ve never met to work on the roof, around your kids’ rooms, above your couch. It’s a trust-first job. So here’s what that trust looks like when you call us.
Every technician who shows up is background-checked and in uniform. Before any work starts, you get a written price in your hand, with a clear scope. Shoe covers and drop cloths go down on arrival. Nothing gets moved without asking. And before the crew leaves, we photograph the clean-up so you can see the state we left your home in.
We call it the Cedarwell Care Promise: shoe covers and drop cloths, a written price before work begins, and a photo of the clean-up. It’s on every job. And every liner installation, rebuild, crown repair, and inspection carries the 365-Day Done Right Promise: if it’s not right, we make it right. No fine print. No runaround.
Our liner and rebuild work uses professional-grade chimney products: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. We choose pet-safe products where there’s a choice: families with kids and animals shouldn’t have to worry about chemical smells lingering in the living room after we leave. Quiet tools when the little ones are napping. Respectful of your house, respectful of your schedule.
We’re part of the Cedarwell family of companies, established in 2003. Kindling Chimney Orlando is independently owned and operated, led by Danny Cortes, who answers for every job we do in this market.
If your chimney needs a liner, a crown, a repoint, or a full rebuild, start with a Chimney Liner & Rebuild in Orlando inspection. We’ll show you exactly what’s going on inside the flue with a camera, explain what it costs with a written price, and leave your home exactly as we found it, only with a safer chimney.
Call (850) 940-3442 for a free estimate. A live person answers, any hour, every day. Let’s take a look at that chimney together.
Pricing reflects the Orlando market as of 2026. Kindling Chimney Orlando offers free estimates – call (850) 940-3442.
Written by Danny Cortes, Owner at Kindling Chimney Orlando, serving Orlando since the Cedarwell company’s founding in 2003.
What Our Customers Say
"First sweep since we bought the house. He put down a drop cloth and used a vacuum so there wasn't a speck of soot anywhere, which with light carpet I was dreading. Showed me the flue on camera."
- Lorraine Petty"Careful and clean from start to finish. He wore booties inside and taped off the hearth. Explained what was safe to burn and what wasn't, calm and no pressure."
- Marcus Halvorsen"We have a toddler and a cat and the tech was great about keeping doors closed and not leaving tools out. Cleaned the fireplace spotless and left a photo of the finished flue."
- Perry Osei