Olympia Chimney Flue Liner Replacement Nationwide

Olympia Chimney Flue Liner Replacement: The Orlando Owner’s Guide

If your Olympia Chimney flue liner has cracked, corroded, or started flaking, replacement in Orlando typically runs between $2,200 and $4,800 installed, depending on liner diameter, height, and whether insulation is needed. We stock Olympia Chimney-compatible liners on our trucks and can usually complete a replacement in a single day. Most Orlando homeowners discover the failure during an annual sweep, when the brush pulls out thin metal flakes, or when a Level 2 camera inspection shows a split seam after years of Central Florida humidity and wood-burning heat cycles.

Call (850) 940-3442

The honest truth: a flue liner doesn’t fail overnight. It fails slowly, quietly, and then all at once. Danny Cortes has inspected hundreds of Olympia Chimney systems across Dr. Phillips, Winter Park, and College Park, and the pattern is consistent. Heat expands the liner. Moisture from our humid climate condenses inside the flue. The liner contracts. Repeat that for eight to twelve years and the seams start to open. You won’t see it from the hearth. You’ll only see it with a camera, or when the sweep’s brush sounds different against the flue wall.

Key Takeaways

• Olympia Chimney flue liners are matched by inner diameter, not fireplace brand, so measuring matters more than the model number.
• Most Orlando replacements cost $2,200-$4,800 installed, with insulation adding $400-$700 depending on height.
• Our crews carry 4″ through 8″ Olympia Chimney-compatible liners on the truck, so most jobs go from quote to done in one visit.
• We’re an independent service provider, not affiliated with Olympia Chimney, and we give you a written price before any work starts.

Before any liner gets ordered or quoted, we run a camera down the flue. You see what we see. Nothing gets recommended without visual evidence you can review yourself, right there on the screen.

Which Olympia Chimney Models This Applies To

Olympia Chimney builds two primary liner product families that we replace most often in Orlando homes: the Olympia Hybrid and the Olympia Pro Series. The Hybrid uses a corrugated 316L stainless steel inner wall with a galvanized outer wall, designed for wood-burning and gas applications. The Pro Series is a single-wall 316Ti titanium-stabilized liner, rated for higher continuous temperatures and typically specified for wood stoves and fireplace inserts.

Here’s the compatibility gotcha most homeowners and plenty of contractors miss: what matters isn’t the fireplace brand or the original liner label. It’s the inner diameter and the appliance type. Olympia Chimney liners are sized in 4″, 5″, 5.5″, 6″, and 8″ inner diameters. A 6″ Olympia Hybrid from 2014 is dimensionally compatible with any listed 6″ 316L liner from a reputable manufacturer like DuraFlex or Gelco, provided the liner meets UL 1777 for the same fuel type. For Olympia Chimney specifically, we’ll always confirm the original diameter by measuring the liner that’s coming out, then match the replacement to the appliance’s BTU output and the existing flue tile ID. Ordering by model number alone, without measuring, is how people end up with a 5.5″ liner shoved into a 6″ system and a draft problem that never quite resolves.

What we stock and recommend: for wood-burning open fireplaces, the Olympia Hybrid in 316L is our default. For inserts and wood stoves, the Pro Series 316Ti holds up better under sustained heat. Both are professional-grade, and both are lines we keep on the truck in common diameters.

Signs Your Olympia Chimney Flue Liner Replacement Is Failing

• Metal flakes in the firebox or on the smoke shelf. This is the most common first sign. Thin, shiny stainless flakes mean the liner’s inner wall is delaminating. In Orlando’s humidity, this corrosion accelerates once condensation has a hold on the metal.
• A crackling or popping sound from the flue during a fire. As the liner heats and expands, a compromised seam will flex audibly. It’s not the firewood. It’s the metal shifting where it shouldn’t.
• Rust streaks or staining on the exterior chase or brick face. Moisture getting between the liner and the masonry will eventually express itself on the outside. We see this often in Dr. Phillips homes where sprinkler systems keep the chase damp year-round.
• A fireplace that drafts worse than it used to. Smoke pushing back into the room, even slightly, means the flue’s internal geometry has changed. A corroded liner catches smoke, disrupts the draft, and sends particulates back into your living space.
• Visible gaps, separation, or holes on the camera report. This is the definitive one. When Danny or our technicians run the camera and you can see daylight through a seam or a breach in the liner wall, the liner has failed as a containment system. It’s no longer protecting the chimney structure from heat and acids.

Replacement Cost & What’s Included

For Orlando homes, most Olympia Chimney flue liner replacements land between $2,200 and $4,800 installed. Here’s how that range breaks down:

• Liner material (Olympia Hybrid or Pro Series, 316L or 316Ti): $38-$62 per foot, depending on diameter and grade.
• Liner insulation wrap kit: $400-$700 for a typical 20-25 foot run. Required for UL 1777 wood-burning applications and strongly recommended in Orlando’s humidity, where uninsulated liners condense early and fail early.
• Top plate, rain cap, and connector hardware: $150-$350, matched to your existing chimney crown dimensions.
• Labor and tear-out of the old liner: $700-$1,400, depending on height, roof access, and how stubborn the old liner is to extract.
• Camera inspection and photo report after install: Included on every liner replacement. You get photos of the finished work, from top to bottom.

Every liner replacement from Kindling Chimney Orlando comes with a written price before work begins, no on-the-spot pressure, and the 365-Day Done Right Promise. If the installation isn’t right, we make it right. The liner itself carries the manufacturer’s limited warranty, and our workmanship is covered by our promise for a full year.

DIY or Call Us?

Flue liner replacement is not a DIY job. The liner runs the full height of your chimney, through tight clearances, past combustible framing in most Orlando homes. A liner that isn’t properly connected, insulated, and terminated can direct heat and carbon monoxide into wall cavities without ever producing a visible sign. That’s the honest safety line, and we hold it for everyone who asks.

What you can safely do yourself: shine a bright flashlight up from the firebox and look for visible flaking or separation at the first few feet. Take photos of the liner tag or any visible labels before calling us, it helps us identify what’s there. And if you hear popping sounds from the flue during a fire, stop burning until it’s inspected. Beyond that, this is a trained-professional repair. One of our background-checked, uniformed technicians will handle the roof work, the tear-out, and the install, with shoe covers and drop cloths down before anything moves inside your home. Call (850) 940-3442 and we’ll schedule a camera inspection first. No work gets quoted until we can show you exactly what’s inside your flue.

FAQs