Famco Chimney Sweep Nationwide

Famco Chimney Sweep in Orlando: What to Know First

Famco chimney sweep in Orlando runs $189 – $289 for a standard open-flue fireplace, and we can usually get to your home within 3 – 5 business days. We’re an independent Famco service provider, which means we see these units every week, know their weak points, and don’t have to call a manufacturer hotline before we start. If you own a Famco fireplace or stove and haven’t had the flue swept in the last year, this page tells you exactly what to expect. Call (850) 940-3442 and a live person answers, any hour, any day.

Call (850) 940-3442

How Famco Products Fail – and How We Fix Them

Famco builds dependable equipment, but every brand has patterns. After years of sweeping Famco units across Orlando and the Dr. Phillips area, we know what to look for before we even set up the ladder. Here’s what we find most often:

• Creosote loading in the offset elbow on Famco prefab flues. The angled connector just above the firebox traps more condensation than the straight sections. In Orlando’s humidity, that creosote stays sticky and attracts soot faster than a dryer flue would. We remove it by hand with poly brushes and a HEPA vacuum, never with metal scrapers that gouge the stainless liner.
• Warped baffle plates on older Famco zero-clearance fireplaces. The baffle sits directly above the fire and takes years of heat cycling. Once it warps, you get a lazy flame and more smoke drafting back into the room. We check the baffle on every Famco sweep and tell you honestly if it’s still serviceable or worth replacing with an OEM-spec part.
• Door gasket compression on Famco inserts and stoves. The fiberglass rope gasket flattens over time, especially on units that get daily winter use. A loose door lets excess air in, burns the wood faster, and leaves more soot on the glass. We test the dollar-bill seal during the sweep and replace the gasket right there if it’s tired.
• Secondary air tube blockage on Famco wood stoves. Those small holes along the upper firebox feed air for secondary combustion. In Orlando homes where the stove sits unused through the summer, tiny spiders and dust love those holes. We clear each port as part of the sweep, then confirm the secondary burn looks right before we go.
• Damper plate rust on masonry-connected Famco setups. If your Famco unit ties into a masonry chimney with a standard throat damper, the humid Orlando air rusts the damper plate even when the fireplace is dormant. We lubricate the hinge and check the cable or rod travel so the damper opens and closes cleanly before the burning season.

One thing worth knowing: Famco’s own documentation doesn’t always call out how Central Florida’s humidity gets into these units. A unit that swept clean in a dry climate sits different here. We account for that.

Our Famco Chimney Sweep Process

Every Famco job follows the same calm, methodical sequence. No surprises, no rushing, and you know the price before tools come off the truck.

1. 1
   You call, we listen. A live person answers at (850) 940-3442. Tell us the fireplace type and when you last had it swept. We book a 2-hour arrival window that works around nap schedules, school drops, whatever your house runs on.
2. 2
   We protect the room first. Shoe covers go on at the door. Drop cloths lay down from the entry to the hearth. We don’t move furniture without asking, and if the kids or pets are asleep, we keep the tools quiet.
3. 3
   Danny or one of our techs inspects the Famco unit. We set a bright light up the flue and look for everything on the list above: baffle, gasket, liner, damper, air tubes. You get a plain-English rundown of what we find before anything gets cleaned.
4. 4
   You get a written price. If it’s a standard sweep, the price you were quoted is what you pay. If we find something extra, we show you the camera photo and quote the fix separately. Nothing happens without your go-ahead.
5. 5
   The sweep runs top to bottom. We brush the full flue length, vacuum with a HEPA filter, and clean the firebox, glass, and gasket channel. Pet-safe products where there’s a choice, always.
6. 6
   We test and show the work. We check the draft with the damper open and closed, verify the secondary burn where applicable, and take a photo of the clean firebox and the protected floor before we pack up. The 365-Day Done Right Promise covers it all.

What Famco Chimney Sweep Costs in Orlando

Most standard Famco chimney sweeps in Orlando run between $189 and $289 when the flue is in normal condition. That includes the full top-to-bottom sweep, firebox clean, glass polish, and a visual Level 1 inspection. If there’s heavy glazed creosote, a deeply warped baffle, or a rusted damper assembly, the price moves. But you’ll see the number in writing before any of it starts.

Those numbers reflect what we actually see across Orlando, not a website range built to lure calls. Call (850) 940-3442 and tell us what unit you have. We’ll give you a straight quote before we ever set foot inside.

Why Orlando Homeowners Call Kindling Chimney Orlando for Famco Work

Orlando has no shortage of chimney companies. What makes us worth the call is simple: we work in a way you can hold us to. Every visit starts with The Cedarwell Care Promise, which means shoe covers and drop cloths before anything else, a written price before any work starts, and a photo of the clean-up before the crew leaves. Every job, no exceptions. If we get anything wrong, the 365-Day Done Right Promise means we make it right. No fine print, no runaround.

And when your Famco unit needs more than a sweep, we don’t improvise. We work with professional-grade materials from brands we trust in chimneys: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. If a liner is involved, we’ll recommend the right one for your exact setup, not whatever’s left on the truck. Danny Cortes, our owner, has spent more than two decades in chimney work and still goes out on inspections that need a second set of experienced eyes. That’s just the job, the way we think it should be done.

How often should a Famco fireplace be swept in Orlando?

Once a year, even if you only burn a few dozen fires. The recommendation from the National Fire Protection Association is annual inspection and cleaning when needed, and Orlando’s humidity makes that minimum more important, not less. We can tell you during the visit whether your burn habits mean you can stretch a sweep or need it every time.

Will sweeping my Famco void the manufacturer warranty?

No. Regular professional chimney sweeping is required by every real fireplace manufacturer’s warranty, Famco included. What voids warranties is neglect, unapproved modifications, or repairs done with parts that don’t match the unit’s specs. We use OEM-spec parts and document everything we touch, so your warranty stays intact. Call (850) 940-3442 if you want us to just check the paperwork before we start.

Do you have Famco parts on the truck, or do you have to order them?

We carry common Famco items like door gaskets, air tubes, and baffle plates on the truck, because Orlando tends to wear the same few components out on repeat. For less common parts, we order OEM-spec and schedule you back in quickly, usually within the week. We’ll always tell you at the visit whether it’s same-day or second-trip, and the written price covers the whole job, not just the sweep.

What actually happens if I skip a chimney sweep?

Creosote builds up in layers, and the first layer is the one that ignites easiest. Beyond that, a heavily loaded flue drafts poorly, pushes smoke into the home, and burns through gaskets and baffles faster. A yearly sweep costs less than a replacement baffle, a smoke-damaged rug, or a night where the fireplace won’t stay lit. Call us for an exact quote. Estimates are free.

Written by Danny Cortes, Owner, Kindling Chimney Orlando at Kindling Chimney Orlando, serving Orlando and nearby areas.